Standard Listing
NATIONAL LAB FOR SOIL INVESTIGATION AND BUILDING MATERIALS TESTING in Sharjah
Sharjah Industrial Area, Sharjah
Contact
Tap a card to reveal the details and get in touch.
Address
P.O. BOX: 34261, Industrial Area - 3
Sharjah Industrial Area, Sharjah
Brands
1 brand · 3 categoriesFeatured brands
1
Products
3CHEMICAL ANALYSIS FOR SOIL, AGGREGATE, AND CONCRETE IN UAE
CONCRETE INVESTIGATION IN UAE
TESTING OF STEEL PROPERTIES IN UAE
Branches
NATIONAL LABORATORY - P.O BOX 30138 RAS AL KHAIMAH
P.O BOX 30138
NATIONAL LABORATORY - P.O BOX 2370 - UMM AL QUAIN
P.O BOX 2370
NATIONAL LABORATORY - P.O BOX 14860 AJMAN
P.O BOX 14860
NATIONAL LABORATORY - DUBAI
P.O BOX 95399
About
National Lab for Soil Investigation and Building Materials Testing, is a local professional licensed leading soil and building materials testing laboratory in Northern Emirates, established on 19 September, 1987, at industrial Area 3, Sharjah - UAE
Core Services
• Soil Test: Soil Investigation, Auger Boring, Standard Penetration Tests (SPT), Trial Pits, Plate Load Tests, Sieve Analysis, CBR, Permeability, Resistivity, In-Situ Density, Moisture & Density, Liquid & Plastic Limit.
• Concrete Testing: Concrete Compressive Strength (Cube, Cylinder, Masonry and Paving Blocks, Beams, Kerbs), Schmidt Hammer, Ultrasonic Pulse Velocity, And Drilled Core Test.
• Aggregate Testing: Sieve Analysis, Flakiness, Elongation, Abrasion, Impact Value, Soundness, Water Absorption, Alkali Reactivity.
• Steel Testing: Tensile Properties, Bend & Re-Bend and Epoxy Coating.
• Chemical Analysis: Sulphate, Chloride, Ph. TDS In Soil, Aggregate, Concrete and Water.
Core Services
• Soil Test: Soil Investigation, Auger Boring, Standard Penetration Tests (SPT), Trial Pits, Plate Load Tests, Sieve Analysis, CBR, Permeability, Resistivity, In-Situ Density, Moisture & Density, Liquid & Plastic Limit.
• Concrete Testing: Concrete Compressive Strength (Cube, Cylinder, Masonry and Paving Blocks, Beams, Kerbs), Schmidt Hammer, Ultrasonic Pulse Velocity, And Drilled Core Test.
• Aggregate Testing: Sieve Analysis, Flakiness, Elongation, Abrasion, Impact Value, Soundness, Water Absorption, Alkali Reactivity.
• Steel Testing: Tensile Properties, Bend & Re-Bend and Epoxy Coating.
• Chemical Analysis: Sulphate, Chloride, Ph. TDS In Soil, Aggregate, Concrete and Water.